Question: Do I Have To Use Concrete For Mailbox Post?

What are the height requirements for a mailbox?

Position your mailbox 41″ to 45″ from the road surface to the bottom of the mailbox or point of mail entry.

Place your mailbox 6″ to 8″ back from the curb.

If you do not have a raised curb, contact your local postmaster for guidance.

Put your house or apartment number on the mailbox..

Which side of the driveway does the mailbox go on?

rightCurbside mailboxes must be placed on the right-hand side of the road and facing outward so that mail carriers can access it easily without leaving their vehicle. The box or house number on a mailbox must be represented in numbers that are at least 1 inch tall.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

Can the post office tell you where to put your mailbox?

The U.S. Postal Service does not govern wall mount boxes; however, you should notify your local mail carrier before installation to ensure proper placement of the mailbox and check for any local codes or regulations governing placement of the box.

What is the best concrete mix for fence posts?

In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).

Can you cement your mailbox post?

Here’s how to pour concrete to keep post-mount mailboxes in place for the long haul: Prepare a bag of fast-setting concrete mix per manufacturer’s instructions and pour into the hole, around the post. Allow a few inches of space at the top of the hole – do not fill the concrete flush with the ground’s surface.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How many bags of concrete do I need for a mailbox post?

Most mailbox post installations require a 60 lb. bag of dry concrete. Pour a little more water on top of the concrete mix. The concrete mix in the ground will soak in both the water you poured earlier as well as the water from the top.

How many feet apart do you put fence post?

Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

How much does it cost to put in a mailbox?

Estimated Cost Comparison TableLow Estimate $46 – $125Average Cost Estimate $135 – $435Mailbox Cost$14 – $50$25 – $75Post cost$12 – $40$20 – $80Supplies Cost$10 – $25$15 – $40Accessories$10 – $35$20 – $553 more rows•May 16, 2018

What kind of concrete should I use for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Should I use 4×4 or 6×6 fence posts?

6×6 is overkill for sturdiness. 4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial.

Can the post office force me to move my mailbox?

“We can’t mandate or demand that they move their mailboxes,” he said. “We can only ask and encourage.”

Can I just put up a mailbox?

Purchasing a mailbox The United States Postal Service DOES NOT sell mailboxes. You may be able to purchase approved mailboxes at local department stores, on the internet, or at other locations. Mailbox manufacturers must meet all applicable Postal Service mailbox standards.

How much quikrete do I need for a mailbox post?

Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4. Set the post into the hole and attach 2×4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical.

Can I move my mailbox from the street to my house?

The USPS does not legislate the relocation of residential mailboxes nationally. Rather, they allow local postmasters to decide what is best for their geographic location and mail service. … It can save you a lot of headache if you take the time to call or visit the post office before moving your house mailbox.

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.