Quick Answer: How Long Does Water Based Polyurethane Last?

How long does water based polyurethane take to dry between coats?

1-2 hoursAllow product to dry a minimum of 1-2 hours between coats.

Sanding between coats is not required for adhesion as long as the time between coats is less than 6 hours.

However, screening or sanding between coats usually produces a smoother better looking finish..

How long does it take for water based polyurethane to stop smelling?

The floor should be mostly cured (enough to live on) in the first 5-7 days, but it can take up to a month for the odors to be completely gone, and for the finish to reach its maximum hardness. For the first few days, “airing out” the house should be a priority.

Can you put too many coats of polyurethane?

Generally, more than 3 coats of poly doesn’t do much good. It’s really not needed nor recommended. Each additional coat needs to be buffed so you are kind of buffing off half of the previous layer. … It’s kind of like nail polish where it takes longer and longer to dry and cure for each coat.

Can you sleep in house after polyurethane?

We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.

Can water based polyurethane get wet?

Yes, polyurethane provides a protective layer on hardwood (as well as furniture) making it harder for water to penetrate into the wood. But, it is not waterproof; rather, it’s water resistant.

How do you wipe with water based polyurethane?

For water borne polyurethane I use tap water or distilled water (never well water) as my thinning agent. To make your own wipe on polyurethane I recommend thinning to 50/50. One part polyurethane to one part thinning agent.

Is 2 coats of polyurethane enough?

You are best off using 3 coats of water based polyurethane for the best results. … Not only is water borne polyurethane thinner, but it also raises the grain of the wood, so the floors can sometimes feel rough with just 2 coats of poly (especially if it’s a cheap brand of poly).

How many coats of water based polyurethane should I use?

3 coatsWe recommend a minimum of 3 coats of water based polyurethane as it coats in thinner, but harder layers, than an oil based poly. Water based polyurethane dries very quickly and up to 4 coats can be applied in one day.

How can you tell if polyurethane is oil or water based?

COLOR: Oil based poly has an amber hue, whereas water based poly is clear. An oil based polyurethane will continue to amber and darken over time, while water based poly will remain clear for the lifetime of the hardwood floor.

What happens if you don’t sand between coats of polyurethane?

Failing to sand between coats of polyurethane does not have a significant impact on the finish. Even so, I still advise that you sand between the coats when applying polyurethane as this will help increase the adhesion between the layers to give you a more level finish.

Is water based polyurethane durable?

Oil-Based Polyurethane. Water-based and oil-based polyurethane each offer good protection; the biggest difference is in appearance. Polyurethane is actually the most durable hardwood floor finish.

How long will Polyurethane last?

Gloss oil-based varnish, polyurethane and Danish oil can last 10 or 20 years, though satin finishes and stains may fail sooner as pigments and flattening agents disable the driers. Water-based coatings and paints can also be viable longer than three years.

Do you have to sand between water based polyurethane coats?

With water-based topcoats, sand any “grain-raise” smooth before applying the final coat. Note: Sanding between coats is not necessary, but it will provide a better finish. After a coat has dried, use 220 or 240 grit sandpaper or extra fine steel wool to lightly sand surface.

What do you do with a polyurethane brush between coats?

Put your paint brush in a plastic bag and place it in the refrigerator when you take a break. Make sure the plastic is completely sealed or your food could pick up some weird odors. This tip really saved me a lot of time when refinishing my wood floors with polyurethane.